ESPRESSOPARTS Pitcher Rinser NEW DESIGN

Product code: 43787HA
Out of stock
£252.00
You will earn 252 points with this purchase
Sorry, this item is out of stock

In most restaurants, coffee shops and cafes, the rinsing of glasses, shot glasses, pitchers and cups is a task that is repeated many times a day. But ever since we developed the pitcher rinser (as we called it back then), we've had a much easier and faster way to rinse these vessels.

With our rinser, any vessel with a diameter from 1 to 4½ inches can now be rinsed in seconds. Imagine the usual steps needed to rinse a pitcher:

  1. take the pitcher
  2. walk to the sink
  3. turn on the faucet
  4. rinse the pitcher
  5. turn off the faucet
  6. put the pitcher in the drainer
  7. dry your hands
  8. walk back.

It takes 8 individual steps to perform this simple task and it's done over and over again without even thinking about it. But imagine that you can save time and energy by doing this instead:

  1. take the pitcher
  2. push it down on the rinser sprayer
  3. let it rinse for a few seconds
  4. take the pitcher off the rinser and put it on a drainer.

Done. That's all there is to it.

Specifications

  • Can be installed into almost any counter top
  • New spray assembly with improved spraying pattern, valve doesn't stick and holes don't clog
  • Improved rinser star with a larger diameter and non-slip ridges
  • Not just for pitchers. The rinser works with any container with a diameter of 1 to 4 ½ inch (20 to 115 mm)
  • Made of stainless steel
  • Cold water connector: 3/8" John Guest type press fitting
  • Cold water only, hot water damages the seals
  • Drain connector: 1/2" barb fitting
  • Outside dimensions (of the pan): 6-1/8" by 5-5/8" by 2-1/2" (160 x 142 x 62mm)
  • Outside dimensions (of the counter flange): 7" by 6-1/2" (178 x 165mm)
  • PRCT664

Reviews

Write a review and let shoppers know what you think of this product.

Brand Espresso Parts
Product Code 43787HA